Honda VTX 1300 4" Bagger Kit & Lids
Kit Includes:
* Saddlebag Rail Kit with Hardware to mount saddlebags to your VTX
* 4" Replacement Fender (USE INNER SUPPORT BRACKET FROM YOUR STOCK FENDER & PLACE IT INSIDE NEW FENDER TO DRILL PROPER HOLES FOR YOUR MODEL BIKE)
* 4" Hard Saddlebags
* Saddlebag Fasteners
* Regular lids
* Installation Instructions
Option to Upgrade to speaker lids available
* Additional $150 option for upgrade to 6.5" or 6x9 speaker lids
* Additional $250 option for upgrade to 8" speaker lids
* Additional $350 option for upgrade to 8" speaker lids with tweeter area
$140 shipping to lower 48
(ships out in three big boxes with separate shipping dates & tracking number) Check spam too for tracking emails
YOU WILL NEED TO PURCHASE THESE PARTS BELOW TO COMPLETE YOUR BAGGER KIT:
* BEND YOUR LICENSE PLATE ONLY OR PURCHASE A RADIUS LICENSE PLATE FRAME
* ANY HARLEY 1993-2013 SADDLEBAG HARDWARE LATCH KIT**CLOTH TETHERS WITH LATCH KIT CAN NOT BE USED ON THESE FIBERGLASS LIDS/ONLY ON THE 8" WITH TWEETER AREA, OTHER LIDS WILL NEED TO FAB SOMETHING IF YOU WISH TO PUT THE CLOTH TETERS ON**
* ANY HARLEY 2013 RUBBER GASKETS FOR SADDLEBAG LIDS
* ANY TAIL LIGHTS YOU LIKE
* YOU WILL NEED TO CHANGE YOUR STOCK EXHAUST THEY ARE T0 WIDE**SOME CUSTOMERS PURCHASE COBRAS OR VANCE & HINES OR MORTON CUSTOM CYCLE**
PRE-MARKED INDENTATIONS ARE FOR R/S/T MODELS ONLY & ARE ONLY A GUIDE**USE YOUR INNER SUPPORT BRACKET TO GET THE PROPER HOLES FOR YOUR MODEL BIKE
DO NOT DRILL PRE-MARKED INDENTATIONS FOR C MODELS
OUR UNIVERSAL REPLACEMENT FENDER FITS ALL MODELS, THAT'S WHY THE INNER SUPPORT BRACKET IS NEEDED TO GET THE PROPER HOLES FOR YOUR MODEL BIKE
FOLLOW/READ INSTALLATION INSTRUCTIONS (BEFORE DRILLING ANY HOLES) FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET FROM YOUR STOCK FENDER TO YOUR NEW FENDER
SISSY BAR AND TOUR PACK CAN BE USED
IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR BACK.
ANY SEAT/TIRE THAT FITS ON STOCK FENDER FITS OURS
EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS
CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE CUSTOM EXTENDED EXHAUST/NONE CUSTOM EXHAUST WILL NOT SHOW THROUGH BACK OF BAGGER KIT OR TOUCH THE FIBERGLASS
MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT