CONTACT US FOR INTERNATIONAL SHIPPING RATES

Honda VTX 1800 6" 9" Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" 2013 Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1800 6" 9" Pointy Bagger Kit - Backyard Air Suspension & Innovations, LLC.

Honda VTX 1800 6" 9" Pointy Bagger Kit

Regular price
$1,300.00
Sale price
$1,300.00
Shipping calculated at checkout.

Honda VTX 1800 6" 9" Pointy Bagger Kit 

 

To apply for 100 days same as cash up to $3000 through Snap Financing

CLICK HERE 

 

FOR ALL VTX MODELS & YEARS

 

Bagger Kit Includes:

* Saddlebag Rails, Crossbar & Hardware to mount saddlebags to your VTX

* 6" Down 9" Back Replacement VTX Fender**THIS IS NOT A HARLEY FENDER** 

* 6" Down 9" Back Hard Saddlebags         

* Regular Lids

* Click here for Installation Instructions


Option to Upgrade to speaker lids available 

* Additional $150 option for upgrade to 6.5", 6x9 or dual 6x9 speaker lids (dual 6x9 are ABS Plastic) 

* Additional $250 option for upgrade to 8" speaker lids 

* Additional $350 option for upgrade to 8" speaker lids with tweeter area

 

$200 shipping to lower 48

(ships out in four big boxes with separate shipping dates & tracking numbers) check spam too for tracking emails

 

**OUR SHOP IS LOCATED IN POMPANO BEACH, FL & WE CAN CUSTOMIZE YOUR VTX INTO A BAGGER** 

 

YOU WILL NEED TO PURCHASE THESE PARTS BELOW TO COMPLETE YOUR BAGGER KIT:

* ANY HARLEY 1993-2013 SADDLEBAG HARDWARE LATCH KIT**CLOTH TETHERS WITH LATCH KIT CAN NOT BE USED ON THESE FIBERGLASS LIDS/ONLY ON THE 8" WITH TWEETER AREA, OTHER LIDS WILL NEED TO FAB SOMETHING IF YOU WISH TO PUT THE CLOTH TETHERS ON**

* ANY HARLEY RUBBER GASKETS FOR SADDLEBAG LIDS 

* ANY TAIL LIGHTS YOU LIKE

* YOU WILL NEED TO CHANGE STOCK EXHAUST ITS TO WIDE**WITH THIS KIT ONLY SHORT EXHAUST CAN BE USED THAT END BEFORE SADDLEBAGS LIKE FROM FREEDOM PERFORMANCE EXHAUST OR MORTONS  CUSTOM CYCLES

 

PRE-MARKED INDENTATIONS ARE FOR R/S/T MODELS ONLY & ARE ONLY A GUIDE**USE YOUR INNER SUPPORT BRACKET TO GET THE PROPER HOLES FOR YOUR MODEL BIKE

DO NOT DRILL PRE-MARKED INDENTATIONS FOR C/N/F MODELS

N & F MODELS WILL NEED TO CUT THE INNER SUPPORT BRACKETS TO FIT INSIDE THE NEW FENDER.  

FOLLOW/READ INSTALLATION INSTRUCTIONS (BEFORE DRILLING ANY HOLES) FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET TO YOUR FENDER 

SISSY BAR AND TOUR PACK CAN BE USED 

IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR BACK. 

ANY SEAT/TIRE THAT FITS ON STOCK FENDER FITS OURS

EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS

CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE CUSTOM EXTENDED EXHAUST/NONE CUSTOM EXHAUST WILL NOT SHOW THROUGH BACK OF BAGGER KIT

MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT

 

*Made from durable fiberglass material easy to work with. Aftermarket Fiberglass Part(s). Each part(s) come unfinished in black primer. pre fitment, prep work, sanding, filler is required prior to painting to remove any blemishes/scratches/ imperfections/Defects each part(s) may come with. Each part(s) varies in fiberglass thickness. Being that these parts are aftermarket modifications will be required for proper fitment. we recommend our products to be installed by a professional*REMEMBER THESE ARE AFTERMARKET PARTS & WILL NEED ALL OR SOME OF THE ABOVE*ITS NOT A BOLT ON KIT*
/* Added by Sean C @ Shopify June 7 2019 */