CONTACT US FOR INTERNATIONAL SHIPPING RATES

Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 9" 2014 Style Bagger Kit & Sidecovers
Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 9" 2014 Style Bagger Kit & Sidecovers
Honda VTX 1300 6" 9" 2014 Style Bagger Kit & Sidecovers
Honda VTX 1300 6" 9" 2014 Style Bagger Kit & Sidecovers
Honda VTX 1300 6" 9" 2014 Style Bagger Kit & Sidecovers
Honda VTX 1300 6" 9" 2014 Style Bagger Kit & Sidecovers

Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers

Regular price
$1,550.00
Sale price
$1,550.00
Shipping calculated at checkout.

Honda VTX 1300 6" 9" Smooth Bagger Kit & Sidecovers  

 

To apply for 100 days same as cash up to $3000 through Snap Financing

CLICK HERE 

  

FOR ALL VTX MODELS & YEARS


Bagger Kit Includes: 

* Saddlebag Rails, Crossbar & Hardware to mount saddlebag to your VTX

* 6" Down 9" Back Replacement VTX Fender**THIS IS NOT A HARLEY FENDER**   

* 6" Down 9" Back Hard Saddlebags with sidecovers**DOESN'T REPLACE STOCK SIDECOVERS**  

* Regular lids

* Click here for Installation Instructions

 

Option to Upgrade to speaker lids available 

* Additional $150 option for upgrade to 6.5", 6x9 or dual 6x9 speaker lids (dual 6x9 are ABS Plastic)

* Additional $250 option for upgrade to 8" speaker lids 

* Additional $350 option for upgrade to 8" speaker lids with tweeter area

 

$200 shipping to lower 48

(ships out in four big boxes with separate shipping dates & tracking numbers)

 

YOU WILL NEED TO PURCHASE THESE PARTS BELOW TO COMPLETE YOUR BAGGER KIT: 

* ANY HARLEY 2014-Present SADDLEBAG HARDWARE LATCH KIT**CLOTH TETHERS WITH LATCH KIT CAN NOT BE USED ON THESE FIBERGLASS LIDS, ONLY THE 8" SPEAKER LIDS WITH TWEETER AREA HAVE PLACEMENT FOR CLOTH TETHERS**

* ANY HARLEY RUBBER GASKETS FOR SADDLEBAG LIDS 

* ANY BAGGER TAIL LIGHTS YOU LIKE

* RADIUS LICENSE PLATE FRAME OR JUST BEND PLATE

* PEG EXTENSIONS IF YOU ARE GOING TO USE PASSENGER PEGS*STOCK PEGS WILL NOT WORK WITH SIDECOVERS*

* YOU WILL NEED TO CHANGE YOUR STOCK EXHAUST THEY ARE T0 WIDE**SOME CUSTOMERS PURCHASE COBRAS, VANCE & HINES, FREEDOM PERFORMANCE EXHAUST OR MORTONS  CUSTOM CYCLES

   

**OUR SHOP IS LOCATED IN POMPANO BEACH, FL & WE CAN CUSTOMIZE YOUR VTX INTO A BAGGER**

 

PRE-MARKED INDENTATIONS ON THE FENDER ARE ONLY A GUIDE FOR THESE MODELS R/S/T DO NOT DRILL PRE-MARKED INDENTATIONS AT ALL FOR C MODELS

**FOR ALL MODELS JUST USE YOUR INNER SUPPORT BRACKET FROM YOUR STOCK FENDER  TO GET THE PROPER HOLES FOR YOUR MODEL BIKE**

FOLLOW/READ INSTALLATION INSTRUCTIONS (BEFORE DRILLING ANY HOLES) FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET TO YOUR FENDER 

SISSY BAR AND TOUR PACK CAN BE USED WITH OUR REPLACEMENT FENDER  

IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR THE BACK. 

ANY SEAT/TIRE THAT FITS ON YOUR STOCK FENDER WOULD FIT ON OUR REPLACEMENT FENDER

THE SIDECOVERS ON THE SADDLEBAGS DO NOT REPLACE YOUR STOCK SIDECOVERS

SIDECOVERS WILL NEED TO BE CUT/NOTCHED OUT FOR PEG EXTENSIONS/PEGS 

EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS & NOT WIDE LIKE STOCK 

CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE A CUSTOM EXTENDED EXHAUST**REGULAR EXHAUST WILL NOT SHOW THROUGH THE BACK OF THE BAGGER KIT** 

NONE OF OUR KITS NEED AIR RIDE SUSPENSION TO WORK

MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT

 

*Made from durable fiberglass material that is easy to work with. Aftermarket Fiberglass Part(s), Each part(s) come unfinished in black primer. Pre fitment, prep work, sanding, filler is required prior to painting to remove any blemishes/scratches/ imperfections/Defects each part(s) may come with. Each part(s) varies in fiberglass thickness. Being that these parts are aftermarket modifications will be required for proper fitment. we recommend our products to be installed by a professional*
*REMEMBER THESE ARE AFTERMARKET PARTS & WILL NEED ALL OR SOME OF THE ABOVE*IT IS NOT A BOLT ON KIT*
/* Added by Sean C @ Shopify June 7 2019 */