CONTACT US FOR INTERNATIONAL SHIPPING RATES

Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 2014 Style Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 6" 2014 Style Bagger Kit - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.
Honda VTX 1300 4" Bagger Kit & Lids - Backyard Air Suspension & Innovations, LLC.

Honda VTX 1300 6" 2014 Style Bagger Kit

Regular price
$1,100.00
Sale price
$1,100.00
Shipping calculated at checkout.

Honda VTX 1300 6" 2014 Style Bagger Kit  

 

Apply for 100 days same as cash up to $3000 through Snap Financing

CLICK HERE 

 

*these are the 2014 style saddlebags & lids with our VTX Replacement fender 

to view the difference between the 2013 & 2014 style saddlebags & lids kits 

Click here 

(2013 come in 4" or 6", if you like to purchase one of those kits instead go back to Honda VTX 1300)

 

Bagger Kit Includes:

* Saddlebag Rail Kit with Hardware to mount saddlebags to your VTX 

* 6"  Replacement Fender (USE INNER SUPPORT BRACKET FROM YOUR STOCK FENDER & PLACE IT INSIDE NEW FENDER TO DRILL PROPER HOLES FOR YOUR MODEL BIKE)

* 6" Hard Saddlebags         

* Regular lids

* Click here for Installation Instructions

 

Option to Upgrade to speaker lids available 

* Additional $150 option for upgrade to 6.5", 6x9 or dual 6x9 speaker lids (dual are ABS Plastic)

* Additional $250 option for upgrade to 8" speaker lids

* Additional $350 option for upgrade to 8" speaker lids with tweeter area

 

Option to add 10" molded speaker pods available, additional $550

* These pods are already molded into the saddlebags. No need to fiberglass in speaker rings & body work them. This setup takes all that work away. Install your favorite 10" sub or mid bass speaker. Drill out your speaker mounting holes & you are done.

 

Option to add LED radius license plate frame, additional $50

 

Option to add Floorboard Adaptor Kit, additional $250

Kit Includes:

* Right & left custom made brackets powder coated in glossy black

* (2) Custom made stainless steel shafts with washers & lock nuts. 

* (8) Aluminum spacers

* Installation Instructions

These are for all 1300/1800 models that have factory floorboards (not pegs). Only modification needed is to widened the hole on your new Harley or Harley aftermarket floorboards to install them with our adaptor kit.

 

$140 shipping to lower 48

(ships out in three big boxes with separate shipping dates & tracking number) Check spam too for tracking emails

 

YOU WILL NEED TO PURCHASE THESE PARTS BELOW TO COMPLETE YOUR BAGGER KIT:

* ANY HARLEY 2014+ HARDWARE SADDLEBAG LATCH KIT**CLOTH TETHERS WITH LATCH KIT CAN NOT BE USED ON THESE FIBERGLASS LIDS/ONLY ON THE 8" WITH TWEETER AREA, OTHER LIDS WILL NEED TO FAB SOMETHING IF YOU WISH TO PUT THE CLOTH TETHERS ON**

* ANY HARLEY RUBBER GASKETS FOR SADDLEBAG LIDS 

* ANY TAIL LIGHTS YOU LIKE

* YOU WILL NEED TO CHANGE YOUR STOCK EXHAUST THEY ARE T0 WIDE**SOME CUSTOMERS PURCHASE COBRAS, VANCE & HINES, FREEDOM PERFORMANCE EXHAUST OR MORTONS CUSTOM CYCLES


**OUR SHOP IS LOCATED IN POMPANO BEACH, FL & WE CAN CUSTOMIZE YOUR VTX INTO A BAGGER**

 

PRE-MARKED INDENTATIONS ARE FOR R/S/T MODELS ONLY & ARE ONLY A GUIDE**USE YOUR INNER SUPPORT BRACKET TO GET THE PROPER HOLES FOR YOUR MODEL BIKE

DO NOT DRILL PRE-MARKED INDENTATIONS FOR C MODELS

OUR UNIVERSAL REPLACEMENT FENDER FITS ALL MODELS, THAT'S WHY THE INNER SUPPORT BRACKET IS NEEDED TO GET THE PROPER HOLES FOR YOUR MODEL BIKE

FOLLOW/READ INSTALLATION INSTRUCTIONS (BEFORE DRILLING ANY HOLES) FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET FROM YOUR STOCK FENDER TO YOUR NEW FENDER 

SISSY BAR AND TOUR PACK CAN BE USED 

IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR BACK. 

ANY SEAT/TIRE THAT FITS ON STOCK FENDER FITS OURS

EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS

CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE CUSTOM EXTENDED EXHAUST/NONE CUSTOM EXHAUST WILL NOT SHOW THROUGH BACK OF BAGGER KIT OR TOUCH THE FIBERGLASS

MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT

 

*Made from durable fiberglass material easy to work with. Aftermarket Fiberglass Part(s). Each part(s) come unfinished in black primer. pre fitment, prep work, sanding, filler is required prior to painting to remove any blemishes/scratches/ imperfections/Defects each part(s) may come with. Each part(s) varies in fiberglass thickness. Being that these parts are aftermarket modifications will be required for proper fitment. we recommend our products to be installed by a professional*REMEMBER THESE ARE AFTERMARKET PARTS & WILL NEED ALL OR SOME OF THE ABOVE*ITS NOT A BOLT ON KIT*
/* Added by Sean C @ Shopify June 7 2019 */