Honda VTX 1800 4" Bagger Kit
To apply for 100 days same as cash up to $3000 through Snap Financing
FOR ALL VTX MODELS & YEARS
Bagger Kit Includes:
* Saddlebag Rails, Crossbar & Hardware to mount saddlebags to your VTX
* 4" Replacement VTX Fender**THIS IS NOT A HARLEY FENDER**
* 4" Hard Saddlebags
* Regular lids
* Click here for Installation Instructions
Option to Upgrade to speaker lids available
* Additional $150 option for upgrade to 6.5", 6x9 or dual 6x9 speaker lids (dual 6x9 are ABS Plastic)
* Additional $250 option for upgrade to 8" speaker lids
* Additional $350 option for upgrade to 8" speaker lids with tweeter area
$180 shipping to lower 48
(ships out in three big boxes with separate shipping dates & tracking numbers) check spam too for tracking emails
YOU WILL NEED TO PURCHASE:
* ANY HARLEY 2013 & UNDER SADDLEBAG LATCH KIT**CLOTH TETHERS WITH LATCH KIT CAN NOT BE USED ON THESE FIBERGLASS LIDS/ONLY ON THE 8" WITH TWEETER AREA, OTHER LIDS WILL NEED TO FAB SOMETHING IF YOU WISH TO PUT THE CLOTH TETHERS ON**
* ANY HARLEY RUBBER GASKETS FOR SADDLEBAG LIDS
* ANY BAGGER TAIL LIGHTS YOU LIKE
* RADIUS LICENSE PLATE FRAME OR JUST BEND PLATE
* WILL NEED TO CHANGE STOCK EXHAUST ITS TO WIDE, SOME CUSTOMERS USE COBRAS, VANCE & HINES, FREEDOM PERFORMANCE EXHAUST OR MORTONS CUSTOM CYCLES
**OUR SHOP IS LOCATED IN POMPANO BEACH, FL & WE CAN CUSTOMIZE YOUR VTX INTO A BAGGER**
PRE-MARKED INDENTATIONS ARE FOR R/S/ MODELS ONLY & ARE ONLY A GUIDE**USE YOUR INNER SUPPORT BRACKET TO GET THE PROPER HOLES FOR YOUR MODEL BIKE
DO NOT DRILL PRE-MARKED INDENTATION FOR C/F/N MODELS.
N & F MODELS WILL NEED TO CUT THE BACK OF THE INNER SUPPORT BRACKET
OUR UNIVERSAL REPLACEMENT FENDER FITS ALL MODELS, THAT'S WHY THE INNER SUPPORT BRACKET IS NEEDED TO GET THE PROPER HOLES FOR YOUR MODEL BIKE
FOLLOW INSTALLATION INSTRUCTIONS FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET TO YOUR FENDER
SISSY BAR AND TOUR PACK CAN BE USED
IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR BACK DEPENDING ON MODEL BIKE
ANY SEAT/TIRE THAT FITS ON STOCK FENDER FITS OURS
CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE CUSTOM EXTENDED EXHAUST/NONE CUSTOM EXHAUST WILL NOT SHOW THROUGH BACK OF BAGGER KIT
EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS & NOT WIDE LIKE STOCK
NONE OF OUR KITS NEED AIR RIDE SUSPENSION TO FUNCTION
MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT