Honda VTX 1300 4" Bagger Kit Lids & Sidecovers
Kit Includes:
* Saddlebag Rail Kit with Hardware
* 4" Replacement Fender
* 4" Hard Saddlebags
* Saddlebag Fasteners
* Sidecovers with Mounting Hardware (sidecovers do not replace stock sidecovers they go right up in front of them)
* Regular lids
* Installation Instructions
Option to Upgrade to speaker lids available
* Additional $150 option for upgrade to 6.5" or 6x9 speaker lids
* Additional $250 option for upgrade to 8" speaker lids
$170 shipping to lower 48
(ships out in three big boxes with separate shipping dates & tracking numbers) check spam too for tracking emails
YOU WILL NEED TO PURCHASE:
* A RADIUS LICENSE PLATE FRAME OR MAKE YOUR OWN
* ANY HARLEY 2013 & UNDER SADDLEBAG LATCHES
* TAIL LIGHTS
* PEG EXTENSIONS IF YOU ARE GOING TO USE PASSENGER PEGS
* WILL NEED TO CHANGE STOCK EXHAUST, SOME CUSTOMERS USE COBRAS OR V & H.
PRE-MARKED INDENTATIONS ARE FOR R/S/T MODELS ONLY & ARE ONLY A GUIDE**USE YOUR INNER SUPPORT BRACKET TO GET THE PROPER HOLES FOR YOUR MODEL BIKE
DO NOT DRILL PRE-MARKED INDENTATIONS FOR C MODELS
OUR UNIVERSAL REPLACEMENT FENDER FITS ALL MODELS, THAT'S WHY THE INNER SUPPORT BRACKET IS NEEDED TO GET THE PROPER HOLES FOR YOUR MODEL BIKE
FOLLOW/READ INSTALLATION INSTRUCTIONS (BEFORE DRILLING ANY HOLES) FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET TO YOUR FENDER
SISSY BAR AND TOUR PACK CAN BE USED
IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR BACK.
ANY SEAT/TIRE THAT FITS ON STOCK FENDER FITS OURS
KEEP STOCK SIDECOVERS
SIDECOVERS WILL NEED TO BE CUT/NOTCHED OUT FOR PEG EXTENSIONS *INSTALLATION INSTRUCTIONS ARE ON OUR WEBSITE FOR THE SIDECOVERS*
EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS
CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE CUSTOM EXTENDED EXHAUST/NONE CUSTOM EXHAUST WILL NOT SHOW THROUGH BACK OF BAGGER KIT OR TOUCH THE FIBERGLASS
MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT