CONTACT US FOR INTERNATIONAL SHIPPING**100 DAY SAME AS CASH FINANCING AVAILABLE, CLICK ON SNAP BANNER BELOW TO APPLY, FINANCING CAN ALSO BE APPLIED TOWARDS LABOR AT OUR SHOP**

Collection: Honda VTX Pdf

  HONDA VTX 1300/1800 INSTALLATION INSTRUCTIONS

 

**1800 Bagger Kits NO longer use Spacers Mentioned In Installation Instructions**updated our kits after a few years to where they are not needed**

**DO NOT DRILL ANY HOLES UNTIL YOU HAVE READ THE FULL INSTALLATION INSTRUCTIONS**ALL MODELS ARE DIFFERENT**USE THE INNER SUPPORT BRACKET FROM YOUR STOCK FENDER & PLACE IT INSIDE YOUR NEW FENDER TO GET THE CORRECT HOLES FOR YOUR MODEL BIKE**

Honda VTX 1300/1800 4" & 6" Bagger Kitclick here

 

Honda VTX 1300/1800 6" Down 9" Back Bagger Kits click here

 

Honda VTX 1300/1800 Cholo X Fender

* TO MOUNT YOUR CHOLO FENDER, TAKE THE INNER SUPPORT BRACKET FROM YOUR STOCK FENDER & PUT IT INSIDE YOUR CHOLO FENDER & DRILL THE HOLES FROM THAT INNER SUPPORT BRACKET FOR YOUR MODEL BIKE, ONCE IT SITS PROPERLY INSIDE THE CHOLO FENDER. EACH MODEL HAS DIFFERENT INNER SUPPORT BRACKETS. FOR 1800 N & F MODELS INNER SUPPORT BRACKET WILL NEED TO BE CUT. YOU WILL USE ALL YOUR STOCK HARDWARE.

* DO NOT DRILL PRE-MARKED INDENTIONS, USE INNER SUPPORT BRACKET TO GET THE PROPER HOLES FOR MODEL BIKE

​* UNIVERSAL REPLACEMENT FENDER FITS ALL MODELS, CAN RIDE TWO UP

 

 

Honda VTX 1300/1800 Daymaker & Mounting Rings (not for 1800F Model) click here 

 

Honda VTX 1800F Model only Daymaker & Mounting Rings click here

 

Honda VTX 1300 Nacelle click here 

 

Honda VTX 1300/1800 Installation Instructions for Sidecovers click here 

 

Honda VTX 1300/1800 Manual Center Stands

 https://youtu.be/zsy_w6Weg9o

 

Honda VTX 1300 & 1800 Air Ride Suspension kits come pre-labeled & kit is plug n play.

**We Recommend mounting compressor underneath swingarm if you do not have hard saddlebags or inside the hard saddlebags or on the saddlebag rails.  Solenoid can be mounted behind the left sidecover inside the tool box**Relay can be installed underneath the seat**Momentary switch can be mounted on either sidecover by drilling a 1/4" hole**It is normal when mounting the air shocks to notice the shock mounting studs to not fully come out flush with outer part of the bushings**We are not responsible for improper installation**

**NOTE VTX 1800C AND 1800F ARE REQUIRED TO CHANGE/PURCHASE STOCK UPPER SHOCK MOUNTS TO (HONDA 52452-MCH-000)**

 

Honda VTX 1300 & 1800 Fast Up Air Ride Suspension kits come pre-labeled & kit is plug n play.

**We Recommend mounting compressor underneath swingarm if you do not have hard saddlebags or inside the hard saddlebags or on the saddlebag rails. Install tank on swingarm or inside the hard saddlebags or saddlebag rails**Relay can be installed underneath the seat**Fail safe manual toggle switch can be mounted on either sidecover by drilling a 3/4" hole**It is normal when mounting the air shocks to notice the shock mounting studs to not fully come out flush with outer part of the bushings**We are not responsible for improper installation**You will need to put your bike on a motorcycle lift to remove and replace shocks**

**NOTE VTX 1800C AND 1800F ARE REQUIRED TO CHANGE/PURCHASE STOCK UPPER SHOCK MOUNTS TO (HONDA 52452-MCH-000)**

 

 **BELOW ARE THE TABS FOR THE PARTS ABOVE, FOR EASIER/FASTER SEARCH OF THESE PARTS GO TO FILTER BY & CLICK ON ALL PRODUCTS**DON'T FORGET TO CHECK OUT ALL OF OUR OTHER PARTS BY GOING TO OUR MAIN PAGE**

31 products
  • Honda VTX 1300 Manual Center Stand
    Honda VTX 1300 Manual Center Stand - Backyard Air Suspension & Innovations, LLC.
    Regular price
    $395.00
    Sale price
    $395.00
  • Honda VTX 1800 Manual Center Stand
    Honda VTX 1800 Manual Center Stand - Backyard Air Suspension & Innovations, LLC.
    Regular price
    $395.00
    Sale price
    $395.00
  • Honda VTX 1300 Nacelle with 7" Black Daymaker Kit
    Honda VTX 1300 Nacelle with 7
    Regular price
    $410.00
    Sale price
    $410.00
  • Honda VTX 1300 Nacelle with 7" Chrome Daymaker Kit
    Honda VTX 1300 Nacelle with 7
    Regular price
    $410.00
    Sale price
    $410.00
  • Honda VTX 1300 4" Bagger Kit & Lids
    Honda VTX 1300 4
    Regular price
    $950.00
    Sale price
    $950.00
  • Honda VTX 1800 4" Bagger Kit & Lids
    Honda VTX 1800 4
    Regular price
    $950.00
    Sale price
    $950.00
  • Honda VTX 1300 6" Bagger Kit & Lids
    Honda VTX 1300 6
    Regular price
    $950.00
    Sale price
    $950.00
  • Honda VTX 1300 4" Bagger Kit Lids & Sidecovers
    Honda VTX 1300 4
    Regular price
    $1,200.00
    Sale price
    $1,200.00
  • Honda VTX 1300 6" Bagger Kit Lids & Sidecovers
    Honda VTX 1300 6
    Regular price
    $1,200.00
    Sale price
    $1,200.00
  • Honda VTX 1800 4" Bagger Kit Lids & Sidecovers
    Honda VTX 1800 4
    Regular price
    $1,200.00
    Sale price
    $1,200.00
/* Added by Sean C @ Shopify June 7 2019 */