Honda VTX 1300 6" 9" Round Bagger Kit & Sidecovers
To apply for 100 days same as cash up to $3000 through Snap Financing
FOR ALL VTX MODELS & YEARS
Bagger Kit Includes:
* Saddlebag Rails, Crossbar & Hardware to mount saddlebag to your VTX
* 6" Down 9" Back Replacement VTX Fender**THIS IS NOT A HARLEY FENDER**
* 6" Down 9" Back Hard Saddlebags with sidecovers that come molded on to the saddlebags**DOESN'T REPLACE STOCK SIDECOVERS**
* Regular lids
* Click here for Installation Instructions
Option to Upgrade to speaker lids available
* Additional $150 option for upgrade to 6.5", 6x9 or dual 6x9 speaker lids (dual 6x9 are ABS Plastic)
* Additional $250 option for upgrade to 8" speaker lids
* Additional $350 option for upgrade to 8" speaker lids with tweeter area
$200 shipping to lower 48
(ships out in four big boxes with separate shipping dates & tracking numbers)
YOU WILL NEED TO PURCHASE THESE PARTS BELOW TO COMPLETE YOUR BAGGER KIT:
* ANY HARLEY 1993-2013 SADDLEBAG HARDWARE LATCH KIT**CLOTH TETHERS WITH LATCH KIT CAN NOT BE USED ON THESE FIBERGLASS LIDS, ONLY THE 8" SPEAKER LIDS WITH TWEETER AREA HAVE PLACEMENT FOR CLOTH TETHERS**
* ANY HARLEY RUBBER GASKETS FOR SADDLEBAG LIDS
* ANY BAGGER TAIL LIGHTS YOU LIKE
* RADIUS LICENSE PLATE FRAME OR JUST BEND PLATE
* PEG EXTENSIONS IF YOU ARE GOING TO USE PASSENGER PEGS*STOCK PEGS WILL NOT WORK WITH SIDECOVERS*
* YOU WILL NEED TO CHANGE YOUR STOCK EXHAUST THEY ARE T0 WIDE**SOME CUSTOMERS PURCHASE COBRAS, VANCE & HINES, FREEDOM PERFORMANCE EXHAUST OR MORTONS CUSTOM CYCLES
**OUR SHOP IS LOCATED IN POMPANO BEACH, FL & WE CAN CUSTOMIZE YOUR VTX INTO A BAGGER**
PRE-MARKED INDENTATIONS ON THE FENDER ARE ONLY A GUIDE FOR THESE MODELS R/S/T DO NOT DRILL PRE-MARKED INDENTATIONS AT ALL FOR C MODELS
**FOR ALL MODELS JUST USE YOUR INNER SUPPORT BRACKET FROM YOUR STOCK FENDER TO GET THE PROPER HOLES FOR YOUR MODEL BIKE**
FOLLOW/READ INSTALLATION INSTRUCTIONS (BEFORE DRILLING ANY HOLES) FOR YOUR BIKE MODEL & DO NOT DRILL PRE-MARKED INDENTATIONS UNTIL YOU MOCK UP YOUR INNER SUPPORT BRACKET TO YOUR FENDER
SISSY BAR AND TOUR PACK CAN BE USED WITH OUR REPLACEMENT FENDER
IF STOCK FENDER MOUNTING BOLTS ARE TO SHORT YOU WILL NEED TO PURCHASE (4) 10mm X 1.25 X 50mm FOR FRONT & (2) 8mm X 1.25 x 40 mm FOR THE BACK.
ANY SEAT/TIRE THAT FITS ON YOUR STOCK FENDER WOULD FIT ON OUR REPLACEMENT FENDER
THE SIDECOVERS ON THE SADDLEBAGS DO NOT REPLACE YOUR STOCK SIDECOVERS
SIDECOVERS WILL NEED TO BE CUT/NOTCHED OUT FOR PEG EXTENSIONS/PEGS
EXHAUST NEEDS TO LINE UP TO THE TOP OF SWINGARM OR BELOW & NOT STAGGER OUTWARDS TOWARDS SADDLEBAGS & NOT WIDE LIKE STOCK
CUTOUTS ON BAGGER KITS ARE NOT NEEDED UNLESS YOU HAVE A CUSTOM EXTENDED EXHAUST**REGULAR EXHAUST WILL NOT SHOW THROUGH THE BACK OF THE BAGGER KIT**
NONE OF OUR KITS NEED AIR RIDE SUSPENSION TO FUNCTION
MOCK & DRILL ALL HOLES FOR TAIL LIGHTS, LATCHES ETC...BEFORE PAINT